dmesg - Hitachi HTS54505
microcode: microcode updated early to revision 0x2d, date = 2018-02-07
Linux version 4.18.0-041800rc3-generic (kernel@tangerine) (gcc version 7.3.0 (Ubuntu 7.3.0-24ubuntu1)) #201807012030 SMP Mon Jul 2 00:33:15 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000c42a9fff] usable
BIOS-e820: [mem 0x00000000c42aa000-0x00000000c44abfff] reserved
BIOS-e820: [mem 0x00000000c44ac000-0x00000000d33eefff] usable
BIOS-e820: [mem 0x00000000d33ef000-0x00000000daeeefff] reserved
BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000031f5fffff] usable
BIOS-e820: [mem 0x000000031f600000-0x000000031f7fffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C/SAMSUNG_NP1234567890, BIOS P14AAJ 04/15/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x31f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0C0000000 mask FE0000000 write-back
4 base 0DC000000 mask FFC000000 uncachable
5 base 0DB000000 mask FFF000000 uncachable
6 base 100000000 mask F00000000 write-back
7 base 200000000 mask F00000000 write-back
8 base 300000000 mask FE0000000 write-back
9 base 31F800000 mask FFF800000 uncachable
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xdb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [(____ptrval____)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 97000 size 24576
reserving inaccessible SNB gfx pages
BRK [0x18f75a000, 0x18f75afff] PGTABLE
BRK [0x18f75b000, 0x18f75bfff] PGTABLE
BRK [0x18f75c000, 0x18f75cfff] PGTABLE
BRK [0x18f75d000, 0x18f75dfff] PGTABLE
BRK [0x18f75e000, 0x18f75efff] PGTABLE
BRK [0x18f75f000, 0x18f75ffff] PGTABLE
BRK [0x18f760000, 0x18f760fff] PGTABLE
BRK [0x18f761000, 0x18f761fff] PGTABLE
BRK [0x18f762000, 0x18f762fff] PGTABLE
BRK [0x18f763000, 0x18f763fff] PGTABLE
BRK [0x18f764000, 0x18f764fff] PGTABLE
BRK [0x18f765000, 0x18f765fff] PGTABLE
RAMDISK: [mem 0x31179000-0x348b3fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 SECCSD)
ACPI: XSDT 0x00000000DAFFE170 000094 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: FACP 0x00000000DAFEE000 00010C (v05 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: DSDT 0x00000000DAFF1000 0092DA (v02 SECCSD IVB-CPT 00000000 INTL 20061109)
ACPI: FACS 0x00000000DAF7B000 000040
ACPI: SLIC 0x00000000DAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTL 00000001)
ACPI: SSDT 0x00000000DAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
ACPI: ASF! 0x00000000DAFF0000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: HPET 0x00000000DAFED000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: APIC 0x00000000DAFEC000 000098 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: MCFG 0x00000000DAFEB000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: FPDT 0x00000000DAFEA000 000054 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: SSDT 0x00000000DAFE9000 0007D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x00000000DAFE8000 000AD0 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 0x00000000DAFE7000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: UEFI 0x00000000DAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: POAT 0x00000000DAF78000 000055 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: UEFI 0x00000000DAFE5000 00022E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000031f5fffff]
NODE_DATA(0) allocated [mem 0x31f5cd000-0x31f5f7fff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000031f5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x000000003fffffff]
node 0: [mem 0x0000000040200000-0x00000000c42a9fff]
node 0: [mem 0x00000000c44ac000-0x00000000d33eefff]
node 0: [mem 0x00000000dafff000-0x00000000daffffff]
node 0: [mem 0x0000000100000000-0x000000031f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000031f5fffff]
On node 0 totalpages: 3089290
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13432 pages used for memmap
DMA32 zone: 859630 pages, LIFO batch:31
Normal zone: 34776 pages used for memmap
Normal zone: 2225664 pages, LIFO batch:31
Reserved but unavailable: 54390 pages
Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xc42aa000-0xc44abfff]
PM: Registered nosave memory: [mem 0xd33ef000-0xdaeeefff]
PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff]
PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
[mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 3040862
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12007628K/12357160K available (12300K kernel code, 2632K rwdata, 4348K rodata, 2432K init, 2336K bss, 349532K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 40699 entries in 159 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180531
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 1496.708 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1592fcbf8e6, max_idle_ns: 440795227601 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.41 BogoMIPS (lpj=5986832)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Spectre V2 : Enabling Restricted Speculation for firmware calls
Speculative Store Bypass: Vulnerable
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-2377M CPU @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 4 processors activated (11973.66 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:48:45, date: 07/05/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1530791325.044:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9337909D9800 000784 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9337909EF400 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF933790A23C00 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf0615000-0xf061500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf061a000-0xf061a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf0619000-0xf06193ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf0618000-0xf06187ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [8086:088e] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc42aa000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xd33ef000-0xd3ffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x31f600000-0x31fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0x5000-0x5003] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0x5000-0x500f] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xfffff000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 56556K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcf3ef000-0xd33ef000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.27)
pstore: using deflate compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (44 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ACPI: Battery Slot [BAT1] (battery absent)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.18.0-041800rc3-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0619000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.18.0-041800rc3-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.18.0-041800rc3-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.18.0-041800rc3-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x206a7, pf=0x10, revision=0x2d
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1840987804, 0)->(1826655197, 14332607)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 2bbdac0a07c5d81f420872695c5779dd557512f3'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha1
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Magic number: 10:334:832
rtc_cmos 00:01: setting system clock to 2018-07-05 11:48:47 UTC (1530791327)
Freeing unused kernel memory: 2432K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1796K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, e8:03:9a:0f:c4:4f, XID 2c900800, IRQ 26
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
usb 1-1: new high-speed USB device number 2 using ehci-pci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618100 irq 25
ata2: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618180 irq 25
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-2: new high-speed USB device number 2 using xhci_hcd
r8169 0000:02:00.0 enp2s0: renamed from eth0
checking generic (e0000000 410000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-2: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.01
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB2.0 Hub
usb 3-2: Manufacturer: VIA Labs, Inc.
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: SanDisk SSD i100 24GB, 11.50.04, max UDMA/133
ata2.00: 46905264 sectors, multi 1: LBA48 NCQ (depth 32)
ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 A6C0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 0.04 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 46905264 512-byte logical blocks: (24.0 GB/22.4 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
sda: sda2 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 1496.600 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159296d3708, max_idle_ns: 440795218047 ns
clocksource: Switched to clocksource tsc
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
usb 4-2: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.01
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB3.0 Hub
usb 4-2: Manufacturer: VIA Labs, Inc.
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
usb 3-2.3: new low-speed USB device number 3 using xhci_hcd
usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da, bcdDevice=78.69
usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
random: fast init done
usb 1-1.4: New USB device found, idVendor=2232, idProduct=1035, bcdDevice= 0.05
usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.4: Product: WebCam SC-13HDL12131N
usb 1-1.4: Manufacturer: Generic
usb 1-1.4: SerialNumber: 200901010001
usb 3-2.3: New USB device found, idVendor=04f3, idProduct=0235, bcdDevice=24.58
usb 3-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-2.3: Product: OM
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: OM as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.0/0003:04F3:0235.0001/input/input7
hid-generic 0003:04F3:0235.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:14.0-2.3/input0
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
usb 3-2.4: new low-speed USB device number 4 using xhci_hcd
psmouse serio1: elantech: Elan sample query result 03, 3f, 86
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
usb 3-2.4: New USB device found, idVendor=03f0, idProduct=034a, bcdDevice= 1.21
usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.4: Product: HP Elite USB Keyboard
usb 3-2.4: Manufacturer: Chicony
input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.0/0003:03F0:034A.0002/input/input8
hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-2.4/input0
input: Chicony HP Elite USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.1/0003:03F0:034A.0003/input/input9
input: Chicony HP Elite USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.1/0003:03F0:034A.0003/input/input10
hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-2.4/input1
raid6: sse2x1 gen() 4550 MB/s
raid6: sse2x1 xor() 3112 MB/s
raid6: sse2x2 gen() 5337 MB/s
raid6: sse2x2 xor() 3590 MB/s
raid6: sse2x4 gen() 6338 MB/s
raid6: sse2x4 xor() 4240 MB/s
raid6: using algorithm sse2x4 gen() 6338 MB/s
raid6: .... xor() 4240 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid 707d0f89-4b1d-4432-9d50-6058dc4c1ee9 devid 1 transid 276708 /dev/sdb1
BTRFS info (device sdb1): disk space caching is enabled
BTRFS info (device sdb1): has skinny extents
BTRFS info (device sdb1): enabling ssd optimizations
systemd[1]: Failed to insert module 'autofs4': No such file or directory
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target User and Group Name Lookups.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on LVM2 metadata daemon socket.
BTRFS info (device sdb1): disk space caching is enabled
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
swapon: swapfile has holes
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd-journald[324]: Received request to flush runtime journal from PID 1
systemd-journald[324]: File /var/log/journal/d95f2cf45def46de8e7cbf35dcdc43bf/system.journal corrupted or uncleanly shut down, renaming and replacing.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
cryptd: max_cpu_qlen set to 1000
samsung_laptop: detected SABI interface: SwSmi@
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
media: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
usbcore: registered new interface driver btusb
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
uvcvideo: Found UVC 1.00 device WebCam SC-13HDL12131N (2232:1035)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
gpio_ich: GPIO from 436 to 511 on gpio_ich
uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
input: WebCam SC-13HDL12131N: WebCam S as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
iwlwifi 0000:01:00.0: RF_KILL bit toggled to disable radio.
iwlwifi 0000:01:00.0: reporting RF_KILL (radio disabled)
iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
swapon: swapfile has holes
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1530791336.689:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=774 comm="apparmor_parser"
audit: type=1400 audit(1530791336.689:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=774 comm="apparmor_parser"
audit: type=1400 audit(1530791336.689:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=777 comm="apparmor_parser"
audit: type=1400 audit(1530791336.689:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=777 comm="apparmor_parser"
audit: type=1400 audit(1530791336.689:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=777 comm="apparmor_parser"
audit: type=1400 audit(1530791336.693:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=779 comm="apparmor_parser"
audit: type=1400 audit(1530791336.693:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=779 comm="apparmor_parser"
audit: type=1400 audit(1530791336.697:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=773 comm="apparmor_parser"
audit: type=1400 audit(1530791336.697:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=773 comm="apparmor_parser"
audit: type=1400 audit(1530791336.697:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=773 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net f0000098)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 1496583649 Hz
vboxdrv: Successfully loaded version 5.2.12_Ubuntu (interface 0x00290001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
systemd-journald[324]: File /var/log/journal/d95f2cf45def46de8e7cbf35dcdc43bf/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
perf: interrupt took too long (2539 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
perf: interrupt took too long (3179 > 3173), lowering kernel.perf_event_max_sample_rate to 62750
kauditd_printk_skb: 33 callbacks suppressed
audit: type=1400 audit(1530794325.630:45): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/caravena/.cache/mesa_shader_cache/index" pid=8490 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
audit: type=1400 audit(1530794333.418:46): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/version" pid=8489 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
perf: interrupt took too long (3983 > 3973), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (4994 > 4978), lowering kernel.perf_event_max_sample_rate to 40000
perf: interrupt took too long (6289 > 6242), lowering kernel.perf_event_max_sample_rate to 31750
perf: interrupt took too long (7913 > 7861), lowering kernel.perf_event_max_sample_rate to 25250